Click image to view full size image
This series of ball mill is extensively suitable for ore dressing, chemical, coal, cement and refractory department and to be used as grinding materials.
Bearing-type drive ball mill is a technological change type, compared with traditional ones: 15 lower operating current and reduce the staring current 50 percent. According to battle burning, downtime, the phenomenon of stopping production, not enough to improve the ball concentricity, run instability, current fluctuated, wear serious phenomenon hollow shaft. While using of rolling bearing, the hollow shaft can continue to use, save 90% lubrication oil, improve the loading of 20%, increase production by 15%, 10% speed increase, each saving at 20-30% power.
| Model | Drum size | Speed | Ball Weight | Feed size | Output size | Capacity | Power | Weight |
| m | r/min | t | mm | mm | t/h | kw | t | |
| MQZ1224 | 1.2*2.4 | 31 | 4.8 | 0-20 | 0.074-0.6 | 0.4-6.8 | 37 | 13.43 |
| MQZ1245 | 1.2*4.5 | 31 | 5.2 | 0-20 | 0.074-0.6 | 1.6-12 | 45 | 17.4 |
| MQZ1530 | 1.5*3 | 27.5 | 8.1 | 0-25 | 0.074-0.4 | 2.9-16.5 | 65 | 18.6 |
| MQZ1557 | 1.5*5.7 | 29.2 | 15 | 0-25 | 0.074-0.4 | 4-25 | 95 | 24.54 |
| MQZ1645 | 1.6*4.5 | 27.5 | 14 | 0-25 | 0.074-0.4 | 4-24 | 95 | 26 |
| MQZ1836 | 1.8*3.6 | 23.9 | 11 | 0-25 | 0.074-0.4 | 8-40 | 132 | 33 |
| MQZ1864 | 1.6*6.4 | 23.9 | 18.5 | 0-25 | 0.074-0.4 | 8-60 | 155 | 35.6 |
| MQZ2130 | 2.1*3 | 23.8 | 19.8 | 0-25 | 0.074-0.4 | 6.5-36 | 155 | 45 |
| MQZ2136 | 2.1*3.6 | 23.8 | 27 | 0-25 | 0.074-0.4 | 8-61 | 155 | 46.8 |
| MQZ2265 | 2.2*6.5 | 21.6 | 28 | 0-25 | 0.074-0.4 | 8-35 | 210 | 62 |
| MQZ2430 | 2.4*3 | 22 | 22.5 | 0-25 | 0.074-0.4 | 7-92 | 210 | 67 |
| MQZ2436 | 2.4*3.6 | 22 | 28 | 0-25 | 0.074-0.4 | 7-95 | 210 | 73 |
| MQZ2465 | 2.4*6.5 | 22 | 36 | 0-25 | 0.074-0.4 | 7-110 | 260 | 76 |
| MQZ2736 | 2.7*3.6 | 21.9 | 39 | 0-25 | 0.074-0.4 | 13-140 | 310 | 77 |
| MQZ2745 | 2.7*4.5 | 21.9 | 43 | 0-25 | 0.074-0.4 | 13-150 | 320 | 91 |
| MQZ2836 | 2.8*3.6 | 20 | 42 | 0-25 | 0.074-0.4 | 15-140 | 310 | 94.2 |
| MQZ3060 | 3*6 | 19 | 70 | 0-25 | 0.074-0.4 | 100-145 | 630 | 155 |
| MQZ3245 | 3.2*4.5 | 18.6 | 65 | 0-25 | 0.074-0.4 | 100-145 | 630 | 126 |
| MQZ3260 | 3.2*6 | 18.6 | 86 | 0-25 | 0.074-0.4 | 120-150 | 800 | 176 |
| MQZ3645 | 3.6*4.5 | 17.8 | 90 | 0-25 | 0.074-0.4 | 120-220 | 1000 | 159.7 |
| MQZ3660 | 3.6*6 | 17.8 | 120 | 0-25 | 0.074-0.4 | 50-230 | 1250 | 189 |
| Overflow ball mill | ||||||||
| Model | Dia. | Length | Sength | Speed | Power | Output | Capacity | Weight |
| MQYZ1530 | 1500 | 3000 | 8.6 | 22.5-29.8 | ≤65 | 0.3-0.074 | 6-2.8 | 16.2 |
| MQYZ2130 | 2100 | 3000 | 17.6 | 19-25.2 | ≤155 | 0.3-0.074 | 12.6-5.8 | 43.5 |
| MQYZ2136 | 2100 | 3600 | 21 | 19-25.2 | ≤155 | 0.3-0.074 | 12.8-6 | 47 |
| MQYZ2424 | 2400 | 2400 | 18.8 | 17.8-23.5 | ≤210 | 0.3-0.074 | 13.2-6.2 | 44 |
| MQYZ2430 | 2400 | 3000 | 23 | 17.8-23.5 | ≤210 | 0.3-0.074 | 16.6-7.8 | 46.5 |
| MQYZ2736 | 2700 | 3600 | 35 | 16.8-22.2 | ≤310 | 0.3-0.074 | 25-11.7 | 70 |
| MQYZ2740 | 2700 | 4000 | 38 | 16.8-22.2 | ≤310 | 0.3-0.074 | 27.7-13 | 79 |
| MQYZ3245 | 3200 | 4500 | 61 | 15.5-20.4 | ≤630 | 0.3-0.074 | 44-21.6 | 113 |
| MQYZ3254 | 3200 | 5400 | 73 | 15.5-20.4 | ≤800 | 0.3-0.074 | 52.8-25.9 | 121 |
| MQYZ3260 | 3200 | 6000 | 86 | 15.5-20.4 | ≤800 | 0.3-0.074 | 55.6-24.3 | 129 |
| MQYZ3645 | 3600 | 4500 | 76 | 14.5-19.2 | ≤800 | 0.3-0.074 | 55.6-24.3 | 135 |
| MQYZ3650 | 3600 | 5000 | 86 | 14.5-19.2 | ≤1000 | 0.3-0.074 | 67-28.1 | 145 |
| MQYZ3660 | 3600 | 6000 | 102 | 14.5-19.2 | ≤1250 | 0.3-0.074 | 74.1-32.4 | 154 |
Wet Grate Rolling Bearing Energy Ball Mill
